top of page
SERVICE: Build My Gang Sheet
TAT: 1-3 business days.
 
  • We will build your gang sheet!
  • Just email us at order@pnwprintco.com with your artwork and a detailed list of:
  1. Sizes for each design in inches.
  2. Quantities for each design.
 
1 Varian is FREE - we must charge 1 cent for accounting reasons 😆.
 
Q: "What are variants, and how do I figure them out?"
A:
  • 1 VARIANT: One design that comes in one size - UNLIMITED quantities of each
  • 2-3 VARIANTS: it may be one design in 2-3 sizes, OR 2-3 different designs, one size each, OR any other combination resulting in 2 or 3 variants - UNLIMITED quantities of each
  • 4-6 VARIANTS: any variety of designs and sizes resulting in 4-6 variants - UNLIMITED quantities of each
  • 7-10 VARIANTS: any combination of designs and sizes resulting in 7-10 variants - UNLIMITED quantities of each
  • 11-15 VARIANTS: any combination of designs and sizes resulting in 11-15 variants - UNLIMITED quantities of each
  • 16-20 VARIANTS: any combination of designs and sizes resulting in 16-20 variants - UNLIMITED quantities of each
  • 21+ VARIANTS: any combination of designs and sizes resulting in 21+ variants - UNLIMITED quantities of each
 
If you have any questions, please do not hesitate to contact us at order@pnwprintco.com.

SERVICE: Build My Gang Sheet

PriceFrom $0.01

  • You have to have a heat press for best results. Cricut Easy Press may not work well because you need steady heavy pressure to apply DTF transfers.

    • Heat press settings: 300 degrees, 10 seconds, HIGH pressure. Make sure no seams prevent the press from applying even heavy pressure!
    • Pre-press your garment for 5 seconds to remove moisture.
    • Position your design, cover with parchment or Teflon sheet, and press.
    • Peel HOT.
    • Cover the design with parchment or Teflon sheet, and press for another 5 seconds, HIGH pressure. 
    • PLEASE NOTE: If applying to a 100% Polyester or Nylon material:
    1. Lower temperature to 275-285 degrees.
    2. Lay a thin cotton kitchen towel under the garment. The transfer absorbs humidity from the air. The moisture has to go somewhere, but polyester or nylon are not absorbent. The towel will ensure your transfer is applied correctly and looks fabulous.
bottom of page